Torque Tester ez20

CHF 2'620.00

plus. 8 % Tax excl. Shipping costs

Here you find:
Torque measuring

Quick purchase

Login !

Currencies

Torque Checker DLT-1673

The torque measuring instruments DLT-1673 with a range from 0.15- 10 Nm serves adjusting and examining electric screw driver or other torque-dependent screwing devices.

Product No.:6151

CHF 3'030.00

plus. 8 % Tax excl. Shipping costs

Shipping time: 1 -2 Weeks

Description

Maintaining high assembling quality with ease
In general, screw tightening for assembling is carried out with electric screwdrivers, widely used from the viewpoint of both the quality and efficiency.
With an increase of demand for higher assembling quality in recent years, the torque control of electric screwdrivers is now necessary for maintenance and control of the assembling quality.

Overview of the most important characteristics:

Measuring range 0.15- 10 Nm DLT-1173
High precision
Memory for up to 100 measurements
RS232C for fast data export
Free PC software download
Efficient quality control with PC
Battery or mains operation
Auto power OFF - function
Small dimensions - portable

Have a wide measuring ranges of 0.01~0.15 Nm (DLT-1173) and 0.15~10 Nm (DLT-1673); particularly, DLT-1173 can reliably make micro-torque measurement which requires high precision.

Store the measured data up to 100 ones even after the power is turned off, preventing any data loss. In addition, the data can be fed into a personal computer through RS-232C connector, realizing paperless control for measured torque data.

Can run 15 hours continuously with the battery fully charged (more than two weeks on the condition of one-hour operation per day). In addition, it is of energy saving type with AUTO POWER OFF function (to turn OFF power automatically when left unused for 10 minutes).

Data

Technical Data:


Measuring range DLT-1173	0.15- 10 Nm
Precision	+/- 0.5 % (FS)
Measuring mode	Peak Hold / Track / Peak down
Display	3 1/2 Digit LCD
Measuring unit	kgf x cm / N x m / Lbf x in
Memory for	100 Measurements
Data output	RS-232C
Power source	Rechargeable battery (1.2V Ni-MH cells x 5)
Auto power off	Turns OFF power automatically when left for 10 minutes
Continuous operation time	About 15 hours (from fully-charged state). It varies depending on operating conditions.
Charging time	8 hours max.
Dimensions	160 x 110 x 47 mm
Weight	0.955 kg

We recommend following products:

Torque Checker DLT-1173

The torque measuring instruments DLT-1173/1673 with a range from 1.5 - 150 Ncm respectively. 0.15 - 10 Nm serve adjusting and examining electric screw driver or other torque-dependent screwing devices.

CHF 3'030.00
plus. 8 % Tax excl. Shipping costs