Cable Tester Cirris 1000R+

The Signature 1000R+ is packed with features for a low-cost, portable tester. Ideal for cables, harnesses, and bare PC boards and backplanes of up to 1024 points. Accurately tests resistance as low as 0.1 ohm and automatically learns and tests resistors and diodes in your assemblies.

The Signature 1000R+
"expands" to meet your cable/harness testing needs. From 128 to 1,024 points Cirris' unique modular approach allows you to add expansion boxes as necessary. With the 1000R+ you can test for opens, shorts, and miswires at resistance levels from .1 ohm to 5M ohms. You can even test assemblies with resistors and diodes.

Assure Quality Assemblies:
The Signature 1000R+ does more than just test. It is a complete system for quality assurance. PC Link software allows interfacing to a computer for the purpose of creating/ editing wire lists, logging test data, and more.

Fast, Easy to Use:
Designed for high-volume production use the 1000R+ is fast and simple to use. It communicates in plain English on its 2 line X 16 character LCD. It self-programs from a sample assembly or from wire lists stored in memory. Wire lists can also be downloaded from a computer. Test results are given both audibly and visually. Wire identification by touch, and step-by-step assembly instructions make the 1000R+ an ideal tool for guided harness assembly.

Eliminate Fixturing Hassles:
Cirris Systems offers the widest variety of standard interface adapters in the industry. Most popular connectors are available on cards that simply snap in and out of the analyzer.


Save Time/Save Money:
Catching potential problems before they become real problems saves time, money, and customers. With its compact size and low price the Signature 1000R+ is easy to put right in the hands of those doing the assembly. Workers who perform quality assurance at the point of production eliminate scrap and rework. Use it for incoming inspection to keep defective assemblies out of your operation.

Test Parameters:
The 1000R+ tests at 5.5 volts DC. You can select resistance thresholds from .1 ohm to 5M ohms. In the "AUTO" setting the analyzer will scan the assembly and automatically set the threshold for you. In the "CALC" setting the analyzer learns an assembly and displays or prints the point-to-point wire list - including resistance values.

Tests Assemblies with Resistors and Diodes:
The 1000R+ can automatically learn and test assemblies with multiple resistance values and/or diodes.

Probe/Wrist Strap:
The 1000R+ comes standard with a probe for wire identification. Optionally, a standard wrist strap can be used utilizing body conductance in the guided assembly mode.

Documentation of Wiring,Connectors, and Parameters:
Printouts containing the wiring list, connector identification, and parameter settings programmed into the analyzer's memory are easily created. This information becomes your hard copy documentation of each unique assembly. You then test all future assemblies using this documentation. Printouts also provide proof of testing by identifying the number of good cables tested.

Signature Analysis:
The analyzer derives a unique cable signature (a mathematical reduction of the wire list and adapter signatures into a six-character code) to verify correct programming. When programming the analyzer the operator compares the signature against the documented standard to assure correct programming. A similar signature is used to verify that all test parameters are set properly.

Technical Datas

Cable Tester Cirris 1000R+
Max. Test Points (TP)	128 points , expandable to 1024 points
Test voltage	5,5 VDC
Connections resistance	0.1 Ohm - 10 KOhm as resistance, 10 KOhm - 5 MOhm
Isolation resistance	0.1 Ohm - 500 MOhm
Connection test	128 TP in 0.2 Seek.
Max. points per net	128 TP
Interfaces (Standard)	Epson / Centronics, RS 232 9 pole. D-Sub female
Probe	For test point identification
Memory	Nonvoltage storage of up to 50 wirelists. Lithium battery backup
Power	210-260 VAC, 50 Hz (105 - 135 VAC 60Hz)
Size	Main Unit : 270 x 170 x 50 mm
Weight	1.9 kg

Part-nbr	Type	Description
65804	Cirris 1000 R+	Cable and Harness Tester

Content
	Cable Tester Cirris 1000 LC	22.03.2004
	The Signature 1000LC sets the standard for low-cost cable testing. It self-learns the wiring pattern of any kind of cable or harness and tests for opens, shorts, and miswires in less than one second.
	Cable Tester Cirris 1000RX	14.11.2008
	The Signature 1000RX is a price reduced version of our very popular 1000R+. Ideal for testing cables, harnesses, bare PC boards and backplanes up to 256 points.
	Cable Tester Cirris 1000R+	14.02.2003
	Cable Tester Cirris 1000H+	22.03.2004
	The Signature 1000H+ is the most popular low-cost, portable hipot cable tester ever. It combines all of the easy-to-use features of the Signature-series testers with high voltage insulation and dielectric testing to provide the most complete testing available in an affordable package.
	Cable Tester Cirris Touch 1	22.03.2004
	An incredibly powerful cable tester that features a built-in Pentium-class PC and touch-screen display. Available with SPC Data Collection, networking, and custom scripting language that allows you to create a testing solution for virtually any application.

© 1996 - 2006 ADOLA-Trading GmbH, CH-8800 Thalwil Switzerland